Namura Stator Case Gasket P/N Na-30053Cg2

Description

Namura Stator Case Gasket P/N Na-30053Cg2
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300ºF.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoro , and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A coating is applied on certain applications to prolong performance life.
Visit our eBay Store
About Us
Delivery
Returns
Contact Us
Contact Us
Fast & free shipping
Experienced seller
Hassle free returns
Full manufacturer's warranty
21-Motorsports
Namura Stator Case Gasket P/N Na-30053Cg2
Your browser does not support the video tag.
Namura Stator Case Gasket P/N Na-30053Cg2
$
24.02
Includes Free Shipping and Returns!!!
To 48 Contiguous US States
Order by 3pm EST for same day shipping on most orders
Ask a question
Similar items
Follow us
All pictures are representative only, please read full description and verify fitment with manufacturer
Description
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300ºF.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoro , and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A coating is applied on certain applications to prolong performance life.
Terms
Our items ship from various warehouses around the United States. We will ship from the warehouse closest to your location to speed up transit times. Our items typically ship within 1 business day, most often within a few hours of ordering. For this reason, we usually cannot cancel an order once it's placed... regardless of how quick the buyer contacts seller to request cancellation. Please check with the manufacturer to verify fitment of all parts based on part number.
INTERNATIONAL SHIPPING: All orders ship using eBay's Global Shipping Program. At the moment, we only ship to select countries using this program. All associated fees will be paid upon receipt by the buyer and are not included in the auction price. FREIGHT FORWARDING: If you choose to ship internationally using a US-based freight forwarder, any return shipping, for any reason, is the buyer's responsibility. Please have your freight forwarder thoroughly inspect the item and confirm the contents with you before having it sent out of the US. Seller reserves all rights to deny returns on international returns for any reason. Compatibility chart and application-specific wording in this listing are based specifically for USA market vehicles. Fitment is not guaranteed on international vehicles, as many manufacturers use region-specific options.
Please do not add notes to your order. Our systems are automated, and the notes are not read. If you have any questions about your order, please contact us prior to ordering.
Customers are responsible for verifying the legality of shipping products into their states. Orders placed for items that are restricted in the delivery state will be cancelled.
Payment
We accept payment via PayPal for eBay orders. For shipments to Massachusetts addresses, we are required to collect 6.25% sales tax.
Returns
We accept returns on all new items for an eBay best period of 60 days. New items must be in original packaging(including plastic wrapped items), uninstalled, and in factory new condition. Please contact us for a return authorization and shipping address. Return shipping is paid by the buyer on items that are not defective or damaged.
We only sell factory new parts, no exceptions. Occasionally, an item is defective from the manufacturer, or damaged in transit. Stuff happens, but when it does, we'll take care of you. Contact us right away and we'll get you a prepaid label, schedule a pickup, and get a replacement sent right out.
Returns are not accepted on international orders.
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300ºF.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoro , and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A coating is applied on certain applications to prolong performance life.
Our items ship from various warehouses around the United States. We will ship from the warehouse closest to your location to speed up transit times. Our items typically ship within 1 business day, most often within a few hours of ordering. For this reason, we usually cannot cancel an order once it's placed... regardless of how quick the buyer contacts seller to request cancellation. Please check with the manufacturer to verify fitment of all parts based on part number.
INTERNATIONAL SHIPPING: All orders ship using eBay's Global Shipping Program. At the moment, we only ship to select countries using this program. All associated fees will be paid upon receipt by the buyer and are not included in the auction price. FREIGHT FORWARDING: If you choose to ship internationally using a US-based freight forwarder, any return shipping, for any reason, is the buyer's responsibility. Please have your freight forwarder thoroughly inspect the item and confirm the contents with you before having it sent out of the US. Seller reserves all rights to deny returns on international returns for any reason. Compatibility chart and application-specific wording in this listing are based specifically for USA market vehicles. Fitment is not guaranteed on international vehicles, as many manufacturers use region-specific options.
Please do not add notes to your order. Our systems are automated, and the notes are not read. If you have any questions about your order, please contact us prior to ordering.
Customers are responsible for verifying the legality of shipping products into their states. Orders placed for items that are restricted in the delivery state will be cancelled.
We accept payment via PayPal for eBay orders. For shipments to Massachusetts addresses, we are required to collect 6.25% sales tax.
We accept returns on all new items for an eBay best period of 60 days. New items must be in original packaging(including plastic wrapped items), uninstalled, and in factory new condition. Please contact us for a return authorization and shipping address. Return shipping is paid by the buyer on items that are not defective or damaged.
We only sell factory new parts, no exceptions. Occasionally, an item is defective from the manufacturer, or damaged in transit. Stuff happens, but when it does, we'll take care of you. Contact us right away and we'll get you a prepaid label, schedule a pickup, and get a replacement sent right out.
Returns are not accepted on international orders.
About Us
Delivery
Returns
Contact Us
Join our mailing list!
eBay & Magento Design by