Intelligent Digital Magnetic Stirrer Constant Temperature Mixer 10L ZNCL-TS 110V

Description

新建网页 1
新建网页 1
新建网页 1
新建网页 2
Digital Magnetic Stirrer 10L 110V
Electric heating sleeve is adopted for heating, which has the characteristics of large heating area, even heating and fast heating. The maximum surface temperature is 380℃.
50-10000ml standard or non-standard reaction bottles can be heated and stirred.
Brushless dc motor, stable performance, low noise, long life, no spark generation.
New shell, high temperature resistance, corrosion resistance, and good insulation performance.
30° bevel control panel is suitable for sitting and standing angles.
Knob temperature adjustment, LCD display temperature, visual and intuitive, user-friendly design.
Internal temperature limit protection function.
Usage:
1. Fix over the blender after poling screw hole, adjust height of cross clamp, place to fasten on the reaction  bottle with universal, into the appropriate mixing, insert the power  supply to 110 ∨, turn on the switch.
2. Press the "SPEED" knob and the "r/min" window will display the SPEED.  Adjust the "SPEED" knob clockwise and adjust it to the appropriate  position according to the SPEED display for stirring. After the setting,  the "r/min" window displays the real-time speed. When the set speed is  reached, the speed display window is stable.
3. Press the "HEAT" knob to display the temperature in the "℃" window.  Adjust the "HEAT" knob clockwise and HEAT it to the required position  according to the temperature display. After setting, the "HEAT" window  displays the measured temperature. During heating, the "HEAT" window  shows a jump between the measured temperature and the set temperature.
4. Self-setting function: when the self-setting function is started, the  heating time is the shortest, the impact temperature is the smallest and  the balance is the best when the heating power and solution are  irregular in different heating stages. However, the self-setting  function should be reset after changing the heating medium or heating condition.
5. Start self-tuning: in the normal measurement control state, press and  hold the "AT" button for 8 seconds to enter the self-tuning state, and the AT light flashes in the self-tuning state.
6. There is a rubber plug under the mixer, which is used to protect the  external thermocouple socket from corrosion and rust and to guide the  internal wire. If the plug is removed, the internal probe will be  disconnected and the machine will stop working. When using external  thermocouple, the plug should be unplugged and stored. Insert the plug  of external thermocouple into the socket and lock the nut. Then put the stainless steel probe into the solution for temperature control heating.
7. The appliance is equipped with a couple protection function, when the  thermocouple is not connected properly, the display window "HHHH" green light goes off, the appliance stops heating, need to check before using.
Matters  needing attention:
1.
Please do not dry burn.
2. The instrument should be well grounded.
3. For the first time, white smoke and peculiar smell are emitted, which  is a normal phenomenon. Because the insulation materials contain oil and  other compounds in the production process, they should be put in a  ventilated place and can be used normally after disappearing for several  minutes.
4. The temperature resistance of the motor and magnet of the agitator is  limited. Therefore, during the heating test, especially at high  temperature, the instrument cannot be used for heating alone.
5. At the end of high temperature heating, please turn off the heat, and  leave the residual temperature for a few minutes before turning off and  stirring.
6. The heating part is at a higher temperature. Please be careful when  working to avoid scalding.
7. In case of wet hands, liquid overflow or long-term exposure to  excessive humidity, induction electricity may be transmitted to the  enclosure through the insulation layer. Please make sure that the  grounding wire is used and pay attention to ventilation. If the  electricity leakage is serious, please do not use it again. Please put  it in the sun or in the oven to dry before using it, so as to avoid the  danger.
8. In case of power failure, please first check whether the right rear  safety shall be replaced.
9. When not in use for a long time, please keep the instrument clean and  keep it in a dry place without corrosive gas.
Item included:
Digital Magnetic Stirrer 10L 110V
(
051035
)
Shipping & Handling  Details
Default Shipping Cost or Free  Shipping Information:
▲
Default  shipping cost or free shipping service is only for the customers from  Canada or the lower 48 United States by Canada Post, USPS or the UPS  Ground. Customers from other areas or needs other shipping ways, please  contact us.
▲
Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,  PO Boxes, APO/FPO addresses or other countries/areas,
there  WILL be extra shipping costs, please contact us for more detailed  information.
▲
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should be  undertaken by buyer.
Handling Time:
Shipping  is usually made in 1-3 business days after payments cleared. Orders are  processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax /  Customs duties:
Any  sales taxes or Customs duties are not included. If came out, they must  be undertaken by the buyer.
Damage In  Shipping:
Email or  call us First! We will work with you to get the case resolved in the  fastest method.
Return / Refund
If you are not 100% happy with your  purchase, please contact Us. Please don't directly opened a request or  case without informing us, or else, we will do some discounts on the  warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲
All  returns must be made within 14 days of delivery date. Items must be in  new, unused condition, with all original materials included with the  shipment. A partial refund may be applied for opened or damaged items,  depending on the condition.
▲
Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be deducted  from the refund. 15% restocking fee of the items purchase price will be  charged.
▲
Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
▲
All  returns require a RA (Return Authorization) number that will be given by  our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲
If  product was received damaged or not as described, please send us some  pictures or videos, so we could well understand your problem, then solve  them for you ASAP. Besides, it's much helpful for us to claim with UPS,  remind our related department to pay much more attention to packaging  later on. Hope for your understanding.
▲
Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price will be  refunded back to your original payment method.
▲
If  an item is received damaged, customer service must be contacted within 7  days of receiving your item. All returns require a RA (Return  Authorization) number as above.
Payment
PayPal:
PayPal  preferred only with a confirmed address. We want you to feel secure  in your purchase. Keep everything within PayPal and eBay protects  both buyer and seller.
eCheck Issues:
Payments  via eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments for  you.
Warranty & Feedback
▲
6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period has  expired, you can still seek for service or technical support from us  with low cost.
▲
Any  warranty shipping cost to us is responsible by buyer.
▲
Any  shipping cost to buyer is responsible by the seller.
▲
We  committee to the customer satisfaction and want to bring you the best  purchase experience. If there is any problems, please contact us ASAP.  If not, please leave us a positive feedback as it's very important for  us. Thanks very much.